OSHA Construction Industry 10 Hour EQ+ Course Review & Competency Exam – $49.95

sitecontrol

OSHA 10 Hour EQ+ Construction Industry Review Course and Competency Exam course description: The 10 hour EQ+ (Equivalent Plus) course is intended to provide workers with awareness of common job-related safety and health hazards, while the 30 hour EQ+ (Equivalent Plus) course is more appropriate for supervisors or workers with some safety responsibility. This OSHA 10 Hr EQ+ Construction Industry Course provides training for workers and employers on the recognition, avoidance, abatement, and prevention of safety and health hazards in workplaces in the Construction industry. This course content exceeds the mandatory and elective topics prescribed by OSHA in the 30 Hour Construction Industry course, and includes performance evaluations and objective summative testing on each topic. This course is an excellent means to verify your knowledge acquired through the OSHA Authorized courses and can be used to document REQUIRED training under the OSHA Standards. This course is not the OSHA AUTHORIZED 10 Hour Course. This is a review and competency course designed to meet the training requirements for the applicable OSHA Standards. It is important to note that the OSHA 10 & 30 hour courses are voluntary programs and do not meet the training requirements for any OSHA standards. Although some states, municipalities or others may require outreach training as a condition of employment, it is not an OSHA requirement. None of the courses within the Outreach Training Program is considered a certification. If you are required to take an OSHA Authorized course please reference our live training tab and request a written proposal or go to OSHA’s website for a list of providers in your region.   Course topics for the OSHA 10 Hr EQ+ Construction Industry Review Course & Competency Exam are as follows:
  • Introduction to OSHA -.5 hours
  • OSHA Inspections -.5 hours
  • Focused Four – 4 hours
    • Falls – Fall Protection -1.5 hours
    • Electrocution – Electrical Safety -.75 hours
    • Struck By – Material Handling & Storage -.5 hours
    • Caught In/Between
      • Excavations – .75 hours
      • Control of Hazardous Energy(Lockout/Tagout) -.5 hours
  • Hazard Communication -1.0 hour
  • Fire Protection and Prevention -.5 hours
  • Personal Protective Equipment -.5 hours
  • Scaffolds -.75 hours
  • Stairways and Ladders -.5 hours
  • Hand and Portable Powered Tools -.5 hours
  • Hearing Conservation -.5 hours
  • Confined Spaces -.75 hours
The OSHA Construction Industry 10 Hour EQ+ Course Review & Competency Exam covers 15 topics. After each topic, a 10-question multiple choice, objective summative exam, will be generated to verify course objectives have been properly assimilated. A 70% passing rate is prescribed for each topic. If an individual fails, additional self-study should be performed, and a new exam, generated from our proprietary program, will be presented to the student. Upon enrollment and successful completion of all topics, the student will immediately have available a certificate of completion for documentation of regulatory training.

Print & Read First – OSHA 10 Hour Construction Industry EQ+ Review Course & Competency Exam  Syllabus

 

Course Information

Estimated Time: 10 Hours

Categories: ,

Tags:

Course Instructor

sitecontrol Author
 

OSHA Construction Industry 10 Hour EQ+ Course Review & Competency Exam

$49.95
 
Enroll Now for Exam!!

OSHA Construction Industry 10 Hour EQ+ Course Review & Competency Exam

Introduction to OSHA & the OSH Act
Introduction to OSHA & the OSH Act Course Description The Occupational Safety and Health Act of 1970 (OSH Act) was passed to prevent workers from being killed or seriously harmed at work. This law created the Occupational Safety and Health Administration (OSHA), which sets and enforces protective workplace safety and health standards. OSHA also provides information, training, and assistance to …
Intro to OSHA Inspections
OSHA Inspections Course Description OSHA is committed to strong, fair, and effective enforcement of safety and health requirements in the workplace. OSHA inspectors, called compliance safety and health officers, are experienced, well-trained industrial hygienists and safety professionals whose goal is to assure compliance with OSHA requirements and help employers and workers reduce on-the-job hazards and prevent injuries, illnesses, and deaths …
Fall Protection
Fall Protection Course Description Fall protection is required by OSHA in many different situations. Ladders, scaffolds, lifts, hoisting operations, walking and working surfaces, and working on roofs are some of the major areas of concern, and some requirements differ depending on whether the work activity is covered by the construction standard or the general industry standard. Guardrail requirements are discussed, as well …
Electrical & Electrical Safety Related Work Practices
Electrical & Electrical Safety Related Work Practices Course Description This course begins with basic electrical principles such as static versus dynamic electricity; current, voltage, and resistance; the elements of a circuit; grounding; and insulation. The hazards of electricity, including burns, shocks, electrocution, arcs, fires, and explosions are gone over in detail, as well as first aid procedures. Students will learn the definition, …
Material Handling and Storage
Material Handling and Storage Course Description Where mechanical handling equipment is used requirements include: sufficient safe clearances shall be allowed for aisles, at loading docks, through doorways and wherever turns or passage must be made. Aisles and passageways shall be kept clear and in good repair, with no obstruction across or in aisles that could create a hazard. Permanent aisles …
Excavations
Excavations This course will teach students about different soil and rock types, as well as soil density and moisture content, all of which affect the potential for a cave-in. Definitions of an excavation and a trench are covered, and the depths at which preventive measures are required are stated. Different types of shoring equipment and trench boxes are discussed and shown graphically, …
Control of Hazardous Energy
Control of Hazardous Energy Course Description Electrical hazards can exist at job sites, emergency responses, and industrial plants because of downed power lines, improper use of electrical equipment, unguarded electrical parts, electrical fires, etc. These field operations may also present dangers associated with other hazardous energy sources such as hydraulic, chemical, pneumatic, or stored energy. In addition, servicing and maintenance …
Hazard Communication
Hazard Communication Standard The “Haz-Com” standard is one of the most frequently-violated regulations in OSHA history, mainly because companies fail to be specific enough in training workers on the hazardous chemicals used on the job. This course covers what products need to have label information and Safety Data Sheets, the contents of a SDS, what hazardous chemicals are covered in the …
Fire Protection and Prevention
Fire Protection and Prevention Course Description This course covers OSHA and NFPA requirements, definitions, and proper uses of Class A, B, C, and D extinguishers, including inspections, pressure tests, and tagging requirements. Also discussed are fixed fire suppression equipment, fire detection systems, fire and employee alarm systems, and requirements for fire brigades. Open and Print First – Syllabus and Performance Eval …
Personal Protective Equipment and Clothing
Personal Protective Equipment and Clothing Course Description Personal protective equipment and clothing, commonly referred to as “PPE”, is equipment worn to minimize exposure to hazards that cause serious workplace injuries and illnesses. These injuries and illnesses may result from contact with chemical, radiological, physical, electrical, mechanical, or other workplace hazards. Personal protective equipment may include items such as gloves, safety …
Scaffold Safety
Scaffold Safety Course Description There are many types of scaffolds used in industry, constructed of several materials and with many specialized features. Some are stationary, some are mobile. They must be constructed according to industry standards and erected under the supervision of a “competent person.” In addition, there are specific OSHA recommendations for fall protection while erecting and dismantling scaffolding. This course covers at …
Stairways and Ladders
Stairways and Ladders Course Description Working on and around stairways and ladders is hazardous. Stairways and ladders are major sources of injuries and fatalities among construction workers for example, and many of the injuries are serious enough to require time off the job. OSHA rules apply to all stairways and ladders used in construction, alteration, repair, painting, decorating and demolition …
Hand and Portable Powered Tools
Hand and Portable Powered Tools Course Description This course  looks at the various hazards associated with working with tools and identifies ways to prevent worker injury through proper use of tools and personal protective equipment. The employer is ultimately responsible for the safe condition of tools and equipment used by employees. Employers should never issue or permit the use of …
Hearing Conservation
Hearing Conservation Course Description Many workers ignore hearing protection, not realizing that most hearing loss is permanent, and that its development is so gradual as not to be noticeable until it’s too late. This course discusses the biology of the ear, the auditory nerve, and the types of damage that noise produces. It also demonstrates the wide variety of hearing protection technology …
Permit Required Confined Space Entry
Permit Required Confined Spaces Course Description This course covers the definitions of a confined space, and that of a permit required confined space, the various conditions requiring a written confined space entry permit, typical confined-space hazards, and the functions and duties of entrants, attendants, rescue personnel, and supervisors. Scenarios include site characterization, security, and emergency evacuation for different types of confined …